Hotline:+86 18037508651

|

Email:info@hermmachinery.com

|
Aquatic Feed Pellet Extruder Machinery

Aquatic Feed Pellet Extruder Machinery

Model:DGP & DSP

Capacity:300KG/H - 4T/H

Applicable: Fish, shrimp and pet food industry

Product introduction

With the rapid development of the economy, all kinds of pet, fish, shrimp, and other feed pellets are increasing quickly, and are moving towards commercialization and scale, the market is unusually hot. Aquatic feed pellet extruder machinery is a kind of professional feed pellets machine to meet the market demand. The equipment uses corn, soybean, and other grains as raw material, directly into the machinery can be expanded into different kind shapes feed pellet which is a unique taste, rich nutrition, loved by many pets. Very easy to operate and high production efficiency, aquatic feed pellet extruder machinery can bring you endless profit.
×

Product advantages

  1. The aquatic feed pellet size can be from 0.9-15mm to feed different size fishes.
  2. Aquatic feed pellets produced by this aquatic feed extruder are solid, water-resistant, and damp resistant.
  3. The puffing aquatic feed pellets can float on the water surface without dissolution for over 12 hours.
  4. Salmonellosis and bacterial infections can be killed by high temperature and high pressure, which makes the pellets safer for aquatics, shrimps, etc.
  5. Key parts have high processing precision and long service life.
  6. Producing aquatic feed pellets with different diameters can be realized through changing different molds.
  7. The reasonable structure ensures reliable and safe operation.
  8. It is widely used in Fish Feed Pellet Mill Plant, Crab Feed Pellet Plant Production Line, Shrimp Feed Pellet Making Plant, etc

Raw Materials

The material selection is very wide, such as soybean meal, corn flour, wheat meal, bone meal, meat meal, fish meal and so on. Here is the material requirement:

How to use the aquatic feed pellet extruder machinery to make fish shrimp feed?
How to use the aquatic feed pellet extruder machinery to make fish shrimp feed?

What is Fish Feed Extrusion Process

The commercial fish feed extrusion process refers to cook the mixture of feed ingredients under high temperature, moisture, and high pressure by means of fish feed extruder within a short time, whereby the high temperature is a direct result of friction(dry extrusion) or preconditioning and steam injection (wet extrusion). As a technological treatment, extrusion can make it possible to process a variety of fish feed ingredients, such as soybean, corn, rice, peas, and raw materials with high water content. According to the moisture content of raw materials treatment, the fish feed extrusion process can be divided into two types – dry type extrusion and wet type extrusion.

Dry-type extrusion process: in the process of extruding, it adopts the heat from friction for warming materials, forces materials to pass through die hole, and gets certain pressure simultaneously under the action of screw extrusion. After extruding out of the die hole, materials pressure will decrease sharply and moisture will evaporate so as to achieve the goal of extrusion. During this whole process, water content is always about 15% – 20%.

Wet-type extrusion process: its principle is similar to that of dry-type extrusion, but it needs to add water and vapor to make moisture up to 20% or even over 30% because the rising of materials temperature depends on the addition of vapor.

Advantages of Aquatic Feed Pellets

  1. Convenient feeding management: extruded aquatic feed can float on water for a long time, which makes it easier to observe aquatic ingestion so as to adjust feeding quantity timely and master aquatic growth and health state.
  2. Slight pollution to the environment: with good stability in water, extruded aquatic feed makes it possible to decrease the dissolution and sediment of feed nutrition and then reduce loss and waste, alleviating water pollution.
  3. High digestive utilization ratio: in the process of extruding, the heat, steam, pressure, and other mechanical actions can promote the degree of starch pasting, break and soften the cell wall part of fiber structure and release some digestible materials, which is in favor of the digestion and absorption for aquatic livestock.
  4. In addition, with a longer and easier storage period, aquatic feed via an extrusion process, including floating, sinking, and slow sinking types also can satisfy different demands of aquatic animals with various ingestion habits. All in all, extruded aquatic feed has gained great popularity among aquatic farms and other aquaculture industries around the world.

Application

Technical parameter

DGP Dry Type Extruder Mill Parameter
Model Capacity(t/h) Main motor power(kw) Feeder power(kw) Screw diameter(mm) Cutter power(kw)
DGP40-Cs 0.03-0.04 3.0*2 0.4 Φ40 0.4
DGP40-C 0.03-0.04 5.5 0.4 Φ40 0.4
DGP50-C 0.06-0.08 11 0.4 Φ50 0.4
DGP60-C 0.12-0.15 15 0.4 φ60 0.4
DGP70-B 0.18-0.2 18.5 0.4 φ70 0.4
DGP80-B 0.2-0.25 22 0.4 φ80 0.6
DGP90-B 0.30-0.35 37 0.6 φ90 0.8
DGP120-B 0.5-0.6 55 1.1 φ120 2.2
DGP135-B 0.7-0.8 75 1.1 φ133 2.2
DGP160-B 1-1.2 90 1.5 φ155 3
DGP200-B 1.8-2.0 132 1.5 φ195 3.0-4.0
 
DSP Wet Type Extruder Machine Parameter
Model Capacity(t/h) Main motor power(kw) Feeder power(kw) Screw diameter(mm) Cutter power(kw) Conditioner power(kw)
DSP60-B 0.18-0.2 15 0.4 Φ60 0.4 0.75
DSP70-B 0.25-0.30 18.5 0.6 Φ70 0.6 0.75
DSP80-B 0.35-0.40 22 1.1 Φ80 0.8 1.1-1.5
DSP90-B 0.50-0.60 37 1.1 Φ90 1.1 2.2
DSP120-B 0.70-0.80 55 1.1 Φ120 1.5 2.2-3.0
DSP135-B 1.0-1.2 75 1.5 Φ135 2.2 3.0-4.0
DSP160-B 1.8-2.0 90 2.2 Φ155 2.2-3.0 4.0-5.5
DSP200-B 3.0-4.0 132 2.2 Φ195 3.0-4.0 5.5
DSP200-B 3.0-4.0 132 2.2 Φ195 3.0-4.0 5.5

Solution

Recommended topics

Get Best Quote Now

leave your request, we will contact you as soon as possible.

Please click on"Online Service""WhatsApp"contact us at any time.