Hotline:+86 18037508651

|

Email:info@hermmachinery.com

|
Shrimp Feed Pellet Extruder Maker

Shrimp Feed Pellet Extruder Maker

Model:DGP & DSP

Capacity:300KG/H - 4T/H

Applicable: Fish, shrimp and pet food industry

Product introduction

For shrimp feed to have the desired effect-that is to provide optimal energy for maximum growth-it must meet the following characteristics: Shrimp feed pellets must achieve 100 percent sink ability and have water stability greater than two hours. However, the starch is used to hold pellets together has no real nutritional value for shrimp. Therefore, a process that allows for starches to be replaced by protein can further support the goal of an optimized feed conversion ratio. However, there are quite a few additional factors to consider when determining the best process solution for your shrimp feed manufacturing facility.
×

Product advantages

  1. With different molds, the floating fish feed pellet mill for sale can meet different stage fish. The food can be floating 24hours.
  2. The floating fish feed pellet machine for sale can produce different shapes of feed for fish, dogs, cats, etc. Through the pretreatment of the feed, it can reduce the loss of nutrition and advance the protein ratio. So the feed will be digested easily by animals.3.The floating time can be controlled by the puffing degree adjustment.
  3. High temperature and high-pressure cooking process can kill salmonellosis and bacterial infections and also makes the pellets easy to digest.
  4. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
  5. The cutting device can be adjusted to make pellets of different lengths.
  6. The fish pellet mill can make pellets from diameter 1mm-12mm just by changing the mold.
  7. It is widely used in Fish Feed Pellet Mill Plant, Crab Feed Pellet Plant Production Line, Shrimp Feed Pellet Making Plant, etc

Shrimp Feed Pellet Extruder

Shrimp feed can be produced either by extrusion, intensive pre-conditioning is a decisive stage of the extrusion process. To prevent the expansion of pellets out of the extruder the meal ingredients must be kept at a precise temperature. Additionally, because of all the excess moisture added during both preconditioning and extrusion, drying is also mandatory so moisture stability can be maintained in the finished pellets. However, post-conditioning can be eliminated from the extrusion process altogether.

Several benefits of extrusion include precise control over pellet length, a factor that is important in starter feed where pellets should be as small as Ø0,6mm. This process is not possible on a pellet mill without the addition of a crumbler. In addition, control over pellet porosity means they can be easily coated with patents and oils.

The extrusion technique also allows for substitution of functional starch with nutritional proteins and the expansion control system® allows feed producers to precisely adjust the pellet expansion obtaining full and complete sink ability, the two primary factors for the production of high-quality shrimp feed.

Raw Materials

The material selection is very wide, such as soybean meal, corn flour, wheat meal, bone meal, meat meal, fish meal and so on. Here is the material requirement:

How to use the shrimp feed pellet extruder maker to make shrimp feed?
How to use the shrimp feed pellet extruder maker to make shrimp feed?

Working Principle

Shrimp feed pellet extruder maker can also be named as a technological process, it forces raw materials into one or more of the following processes such as mixing, heating, pasting, cutting, extruding, etc. flow through the die, making material eruption gasification. Diameter of the holes which decide the diameter of pellets has various different sizes.

Advantages of Feed Pellets

  1. Slight pollution to the environment: with good stability in water, extruded fish feed makes it possible to decrease the dissolution and sediment of feed nutrition and then reduce loss and waste, alleviating water pollution.
  2. High digestive utilization ratio: in the process of extruding, the heat, steam, pressure, and other mechanical actions can promote the degree of starch pasting, break and soften the cell wall part of fiber structure and release some digestible materials, which is in favor of the digestion and absorption for aquatic livestock.
  3. Convenient feeding management: extruded fish feed can float on water for a long time, which makes it easier to observe fish ingestion so as to adjust feeding quantity timely and master fish growth and health state.
  4. In addition, with a longer and easier storage period, fish feed via an extrusion process, including floating, sinking, and slow sinking types also can satisfy different demands of aquatic animals with various ingestion habits. All in all, the extruded fish feed has gained great popularity among fish farms and other aquaculture industries around the world.

Application

Technical parameter

DGP Dry Type Extruder Mill Parameter
Model Capacity(t/h) Main motor power(kw) Feeder power(kw) Screw diameter(mm) Cutter power(kw)
DGP40-Cs 0.03-0.04 3.0*2 0.4 Φ40 0.4
DGP40-C 0.03-0.04 5.5 0.4 Φ40 0.4
DGP50-C 0.06-0.08 11 0.4 Φ50 0.4
DGP60-C 0.12-0.15 15 0.4 φ60 0.4
DGP70-B 0.18-0.2 18.5 0.4 φ70 0.4
DGP80-B 0.2-0.25 22 0.4 φ80 0.6
DGP90-B 0.30-0.35 37 0.6 φ90 0.8
DGP120-B 0.5-0.6 55 1.1 φ120 2.2
DGP135-B 0.7-0.8 75 1.1 φ133 2.2
DGP160-B 1-1.2 90 1.5 φ155 3
DGP200-B 1.8-2.0 132 1.5 φ195 3.0-4.0
 
DSP Wet Type Extruder Machine Parameter
Model Capacity(t/h) Main motor power(kw) Feeder power(kw) Screw diameter(mm) Cutter power(kw) Conditioner power(kw)
DSP60-B 0.18-0.2 15 0.4 Φ60 0.4 0.75
DSP70-B 0.25-0.30 18.5 0.6 Φ70 0.6 0.75
DSP80-B 0.35-0.40 22 1.1 Φ80 0.8 1.1-1.5
DSP90-B 0.50-0.60 37 1.1 Φ90 1.1 2.2
DSP120-B 0.70-0.80 55 1.1 Φ120 1.5 2.2-3.0
DSP135-B 1.0-1.2 75 1.5 Φ135 2.2 3.0-4.0
DSP160-B 1.8-2.0 90 2.2 Φ155 2.2-3.0 4.0-5.5
DSP200-B 3.0-4.0 132 2.2 Φ195 3.0-4.0 5.5
DSP200-B 3.0-4.0 132 2.2 Φ195 3.0-4.0 5.5

Solution

Recommended topics

Get Best Quote Now

leave your request, we will contact you as soon as possible.

Please click on"Online Service""WhatsApp"contact us at any time.