Hotline:+86 18037508651

|

Email:info@hermmachinery.com

|
Drum Wood Chipper Shredder

Drum Wood Chipper Shredder

Power: 4-110 KW

Capacity: 3-18 T/H

Applicable: Wood biomass pellet production plant

Product introduction

Herm machinery high-efficiency drum wood chipper shredder is special equipment for the production of wood chips. It is widely used in particleboard factories, medium, and high-density fiberboard factories, straw factories, biopower plants, wood chip factory and other industries. Drum wood chipper shredder has a large in-feed opening, logs or bundles of wood with a diameter of over a meter can be reliably processed in larger wood chippers. The main raw materials for cutting are small-diameter wood, timber harvesting, processing residues (Such as branches, slabs, crusts, log cores, waste veneers, etc.), and can also be used to cut non-wood raw materials (such as sugar cane, reeds, Moso bamboo) Wait).
×

Product advantages

Customizable Design

The size and model can be customized according to the customer's end-use and production capacity.

Flexible Operation

Upper feeding roller assembly can float up and down within the prescribed scope under the effect of hydraulic, to achieve the function of cutting raw materials with different thicknesses.

Reasonable Design

Materials after cutting will discharge through screen holes, those which don't meet the requirement will be cut again in the machine until reaching the standard.

Long Service Life

The use of heavy-duty self-centering bearings, even if the equipment is in continuous operation at full load, also has a long service life.

Secondary Refinement

The chipping machine is equipped with a crushing screen to realize the secondary refinement of oversized woodblocks.

Wide Application

It can be widely used in particleboard factories, medium, and high-density fiberboard factories, furniture factories, biomass power plants, wood chip factories, and biomass preparation industries in the biomass energy industry.

Working Principle

The drum wood chipper shredder is composed of a body, a knife roller, an upper and lower feeding roller, a conveyor belt, and a hydraulic system. The body is welded with high-strength steel plates, which are the supporting foundation of the entire machine. Two or three or four flying knives are installed on the knife roller, and the flying knife is fixed on the knife roller by a professional flying knife bolt through a pressure block. Depending on the thickness of the material being cut, the upper feed roller assembly can float up and down within a certain range using a hydraulic system. The cut qualified pieces fall through the screen holes and are discharged from the bottom. Large pieces will be cut in the machine.

Technical parameter

Model W-Drum-215 W-Drum-216 W-Drum-218
Feeding Size(mm) 160*400 230*590 300*680
Number of blade (pic) 2 2 2
Rotated Speed (r/min) 590 590 650
Capacity(t/h) 3-5 8-10 14-18
Main Motor Power(kw) 4-45 4-55 4-110
Feeder Power(kw) (2.2-3)*2 (3-4) *2 (4-5.5) *2
Oil Pump Power(kw) 1.5 1.5 1.5
Transportation Power(kw) 3 3 4
Weight(kg) 2990 5030 7000
Dimension(mm) 1470*1550*970 1800*1900*1210 2200*2150*1500

Solution

Recommended topics

Get Best Quote Now

leave your request, we will contact you as soon as possible.

Please click on"Online Service""WhatsApp"contact us at any time.