1.8-2T/H Floating Fish Feed Production Line

Herm machinery best selling low consumption 1.8-2 t/h floating fish feed production line available raw materials including grain, fishmeal, bone meal, bean cake, peanut meal, rice bran, wheat bran, clamshell powder, alcohol masterbatch, soybean phosphatide, shrimp flour, salmon powder, feed yeast, etc. 

This 1.8-2 tons per hour fish feed plant line is specially designed for the fish farm owners, small fish feed factories, fish feed manufacturers, and the animal feed suppliers who first begin to enter the fish feed production industry. 1.8-2t/h fish feed mill plant is mainly suitable for the production of sinking fish, floating fish, shrimp feed for grass carp, herring, carp, trout, tilapia, grass shrimp, red tail shrimp, monarch shrimp, freshwater shrimp, prawn, salmon, catfish, carb, etc.

 

Send Inquiry

How to Make Fish Shrimp Crab Feed

(1) Screening: The impurities in soybeans, corn and rapeseed not only affect the quality of products, but also directly affect the processing equipment and personal safety. The screening equipment removes large and long debris such as grass, straw, hemp rope, paper pieces, soil blocks, leaves, sticks and other debris in the raw materials. The screening process is completely closed, and qualified raw materials after screening are lifted into the silo for temporary storage.

raw materials used in the 1.8-2 t/h aquatic fish feed pellet production line

(2) Crushing process: the screened material enters the crusher from the silo through the feeder and is crushed by the impact of the hammer .The particle size of the crushed material is about 01-3mm. The purpose of crushing is to improve the quality of subsequent processes and improve work efficiency.

(3) Heating puffing: The method of item puffing is wet puffing, which is a gelatinization process under the combined effects of moisture, heat, mechanical shear, friction, kneading and pressure difference. Generally, the gelatinization degree can reach 90%-100%.

(4) Cooling of extruded material: In the process of extruding, a large amount of heat is generated due to the introduction of high temperature and high humidity steam while the material is squeezed, which makes the temperature and humidity of the extruded particles higher. For adhesion and mildew, the moisture must be reduced to below 14%, and the temperature must be lowered to below 8°C higher than the air temperature. SKLN counterflow cooler is used for cooling.

(5) Crushing: The cooled material enters the pulverizer through the impeller feeder. The purpose of pulverization is to increase the material The specific surface area can improve the utilization rate of subsequent feed production and increase the contact area of ​​digestive enzymes with the raw materials; reduce the energy consumption of chewing during the animal feeding process, which is beneficial to increase the feed return.

(6) Packaging: Finally, according to market demand, the crushed powder is packaged in plastic bags in the packaging room into finished products for sale.

 
Send Inquiry

Advantages of Aquatic Feed Pellets

• High digestive utilization ratio: in the process of extruding, the heat, steam, pressure and other mechanical actions can promote the degree of starch pasting, break and soften the cell wall part of fiber structure and release some digestible materials, which is in favor of the digestion and absorption for aquatic livestock.
• Convenient feeding management: extruded fish feed can float on water for a long time, which makes it easier to observe fish ingestion so as to adjust feeding quantity timely and master fish growth and health state.
• Slight pollution to environment: with good stability in water, extruded fish feed makes it possible to decrease the dissolution and sediment of feed nutrition and then reduce loss and waste, alleviating water pollution.
• In addition, with longer and easier storage period, fish feed via extrusion process, including floating, sinking and slow sinking types, also can satisfy different demands of aquatic animals with various ingestion habits. All in all, extruded fish feed has gained great popularity among fish farms and other aquaculture industry around the world.

If you are interested in our medium feed pellet production line, please leave us a message with:

What animal feeds do you want to manufacture?

What capacity do you need?

What feed processing equipments do you need? (If you have no idea, just contact us for professional guidance!)

What raw materials do you have? (optional)

 
Send Inquiry

Recommended Equipment

• 

  Single Screw Fish Feed Pellet Extruder

• 

  DSP Wet Type Floating Fish Feed Machine

• 

  Fish Feed Pellet Machine

• 

  DGP Dry Type Floating Fish Feed Machine